|
|
 |
|
|
Varitronics has discontinued the ProImage Plus 3000 and the ProImage XL 3000 poster printers. These poster printers are no longer available. WE STILL STOCK PAPER FOR THESE POSTER PRINTERS.
ProImage XL / ProImage Plus 3000 Poster Printers
Frequently
Asked Questions
|
CLEANING THE PRINTER - SOLVING PROBLEMS
|
|
If one of the following problems occurs,
clean the printer parts outlined below.
|
| |
Problem |
|
Part
to Clean |
|
1.
|
The
paper does not feed properly
|
|
Paper feed
roller |
| 2. |
The
printer makes a rattling or grating noise during printing
|
|
Shuttle
shaft |
| 3. |
Horizontal
lines appear periodically on the printed image
|
|
Thermal heads |
| 4. |
Vertical
lines appear on the printed image
|
|
Platen
glass |
| 5. |
The
original is not scanning properly |
|
Document feed
rollers, platen rollers, eject rollers |
|
| |
Cleaning
the paper feed rollers: |
|
Cleaning
the shuttle shaft: |
|
Wipe with
a soft cloth moistened with water.
Wipe again with a soft, dry cloth. |
|
If the shaft
becomes dirty, the printer will not function properly.
Wipe the shaft carefully with a soft cloth. |
| |
Cleaning
the platen rubber and cutter base: |
|
Cleaning
the thermal heads: |
|
Wipe with a soft, dry cloth.
Caution
Be careful not
to damage the platen rubber.
Avoid wiping the platen rubber with alcohol or other
solvents. |
|
|
When the thermal
heads have cooled (at least 2 minutes after the printer
has been switched off) wipe the heater elements vertically
with a soft cloth.
If the thermal heads are particularly dirty, apply a small
amount of 90% isopropyl alcohol to the cloth. (NOTE: Never
touch the print heads directly with your hands.) |
|
CLEANING
THE SCANNER
|
| |
Cleaning
the platen glass: |
|
Wipe with a soft, dry cloth.
If particularly dirty, use a soft cloth moistened with
water. Wipe again with a soft, dry cloth.
|
| |
Cleaning
the document feed rollers/platen rollers/document eject
rollers: |
|
Wipe with a soft cloth
moistened with water. Wipe again with a soft, dry cloth. |
|
|
CautionAlways remove
the printer power plug from the wall socket before
cleaning the printer.
- Do not use organic solvents
such as benzene, alcohol, thinners or cleaners
in cleaning the printer.
- Do not use detergent in the
cleaning the thermal heads.
- Be careful not to scratch
the platen rubber as the quality of the print
may be affected.
- The scanner cover opens to
approximately a 70 degree angle. Do not attempt
to open the cover any further.
|
|
|
PosterPrinter FAQ Menu
|
|
Sitemap
 |
